Cisco UCS C225 M6 SFF Rack Server - Distributor Server Cisco

Overview Cisco UCS C225 M6 SFF Rack Server

The Cisco UCS C225 M6 SFF Rack Server enhances the capabilities of the Cisco Unified Computing System portfolio within a compact 1-Rack-Unit (RU) form factor. This model incorporates AMD CPUs and offers 16 DIMM slots per CPU, supporting 3200-MHz DDR4 DIMMs with individual DIMM capacities up to 256 GB. For a dual-CPU configuration, the server can support up to 8 TB of memory (with 32 x 256 GB DDR4 DIMMs).

Features and Benefits

The Cisco UCS C225 M6 offers various front drive and rear riser configurations, providing flexibility for different use cases:

Front Drives

Option 1: Up to 10 SAS/SATA/NVMe drives, with up to 4 drives being NVMe.
Option 2: Up to 10 NVMe drives, with all drives being NVMe.

Rear PCIe Risers

Supports one to three half-height PCIe risers, or
One to two full-height PCIe risers.

Internal Slot Options

Cisco 12G RAID controller with cache backup for controlling SAS/SATA drives.
Cisco 12G SAS passthrough HBA for controlling SAS/SATA drives.

Note: NVMe drives are directly controlled by the CPUs.

The server includes a single 1 GbE management port and a modular LAN on motherboard (mLOM) / Open Compute Project (OCP) 3.0 module that provides up to two 100 GbE ports. Additionally, a front chassis connector provides KVM functionality.

The Cisco UCS C225 M6 server can operate as a standalone server or as part of the Cisco Unified Computing System. This integration unifies computing, networking, management, virtualization, and storage access into a single architecture. This provides end-to-end server visibility, management, and control, whether in bare-metal or virtualized environments.

Spesifikasi Cisco UCS C225 M6 SFF Rack Server

Capability / Feature	Description
Chassis	One Rack Unit (1RU) chassis
CPU	One or two AMD Milan or Rome processors
Memory	32 slots for Registered DIMMs (RDIMMs) or Load-Reduced DIMMs (LRDIMMs)
Multi-bit error protection	This server supports multi-bit error protection.
Video	The Cisco Integrated Management Controller (CIMC) provides video using the Matrox G200e video/graphics controller: Integrated 2D graphics core with hardware acceleration Embedded DDR memory interface supports up to 512 MB of addressable memory (8 MB is allocated by default to video memory) Supports display resolutions up to 1920 x 1200 16 bpp @ 60 Hz High-speed, integrated 24-bit RAMDAC Single-lane PCI-Express host interface running at Gen 1 speed
Power subsystem	Up to two hot-swappable power supplies: 1050 W (AC) 1050 W (DC) 1600 W (AC) 2300 W (AC) One power supply is mandatory; one more can be added for 1 + 1 redundancy.
Front panel	A front-panel controller provides status indications and control buttons.
ACPI	This server supports the Advanced Configuration and Power Interface (ACPI) 4.0 standard.
Fans	Eight hot-swappable fans for front-to-rear cooling
InfiniBand	The InfiniBand architecture is supported by the PCIe slots.
Expansion slots	Three half-height riser slots: Riser 1 (controlled by CPU 1): One x16 PCIe Gen 4.0 slot (Cisco VIC), half-height, 3/4 length Riser 2 (controlled by CPU 1): One x8 PCIe Gen 4.0 slot, half-height, 3/4 length Riser 3 (controlled by CPU 1): One x16 PCIe Gen 4.0 slot (Cisco VIC), half-height, 3/4 length OR Riser 1 (controlled by CPU 1): One x16 PCIe Gen 4.0 slot (Cisco VIC), full-height, 3/4 length Riser 2 (controlled by CPU 1): One x16 PCIe Gen 4.0 slot (Cisco VIC), full-height, 3/4 length
Interfaces	Rear panel: One 1Gbase-T RJ-45 management port One RS-232 serial port (RJ45 connector) One DB15 VGA connector Two USB 3.0 port connectors One flexible modular LAN on motherboard (mLOM)/OCP 3.0 slot that can accommodate various interface cards Front panel: One KVM console connector (supplies two USB 2.0 connectors, one VGA DB15 video connector, and one serial port (RS232) RJ45 connector)
Internal storage devices	Drive storage: UCSC-C225-M6S (option 1): Up to 10 SFF SAS/SATA Hard Drives (HDDs) or SAS/SATA Solid State Drives (SSDs) Optionally, up to four SFF NVMe PCIe SSDs (replacing SAS/SATA drives). These drives must be placed in front drive bays 1, 2, 3, and 4 only and are controlled from CPU1. The rest of the bays (5 – 10) can be populated with SAS/SATA SSDs or HDDs. UCSC-C225-M6N (option 2): Up to 10 SFF NVMe PCIe SSDs only. All drives are controlled from CPU1. Only one CPU is required when choosing NVMe SSDs. Other storage: A ministorage module connector on the motherboard supports a boot-optimized RAID controller carrier that holds two SATA M.2 SSDs. Mixing different capacity SATA M.2 SSDs is not supported.
Integrated management processor	A Baseboard Management Controller (BMC) runs Cisco Integrated Management Controller (CIMC) firmware. Depending on your CIMC settings, the CIMC can be accessed through the 1-GE dedicated management port or a Cisco Virtual Interface Card (VIC). CIMC manages certain components within the server, such as the Cisco 12G SAS HBA.
Storage controllers	One Cisco M6 12G SAS RAID controller or up to two Cisco 12G SAS HBAs plug into a dedicated slot. Cisco M6 12G SAS RAID Controller with 4GB FBWC: RAID support (RAID 0, 1, 5, 6, 10, 50, 60, SRAID0, and JBOD mode) Supports up to 24 internal SAS/SATA drives Plugs into a dedicated slot Cisco 12G SAS HBA: No RAID support JBOD/Pass-through Mode support Supports up to 16 SAS/SATA internal drives Plugs into a dedicated slot
Modular LAN on Motherboard (mLOM) / Open Compute Project (OCP) 3.0 slot	The dedicated mLOM/OCP 3.0 slot on the motherboard can flexibly accommodate the following cards: Cisco Virtual Interface Cards (VIC) OCP 3.0 network interface card (UCSC-O-ID10GC)
Cisco Intersight	Cisco Intersight provides server management capabilities.
Note	Cisco UCS Manager (UCSM) support is not available for this server.
Cisco Integrated Management Controller (CIMC)	Requires CIMC Release 4.2(1) or later
Operating temperature	Minimum 10°C to 35°C (50°F to 95°F) with no direct sunlight (If any A10, A100, or rear HDDs are installed, the 35°C (50°F) restriction changes to 30°C (86° F).)
Maximum allowable operating temperature	De-rated 1C/300 m (1F/547 ft) above 950 m (3117 ft)
Extended operating temperature	5°C to 40°C (41°F to 104°F) with no direct sunlight
Maximum allowable operating temperature	De-rated 1C/175 m (1F/319 ft) above 950 m (3117 ft)
Extended operating temperature	5°C to 45°C (41°F to 113°F) with no direct sunlight
Maximum allowable operating temperature	De-rated 1C/125 m (1F/228 ft) above 950 m (3117 ft)
System performance may be impacted	When operating in the extended operating temperature range.
Operation above 40°C	Is limited to less than 1% of annual operating hours.
Hardware configuration limits	Apply to extended operating temperature range.
Nonoperating temperature	Below -40°C or above 65°C (below -40°F or above 149°F)
Maximum rate of change (operating and nonoperating)	20°C/hr (36°F/hr)
Operating relative humidity	8% to 90% and 24°C (75°F) maximum dew-point temperature, noncondensing environment
Nonoperating relative humidity	5% to 95% and 33°C (91°F) maximum dew-point temperature, noncondensing environment
Operating altitude	0 m to 3050 m {10,000 ft)
Nonoperating altitude	Below 0 m or above 12,000 m (39,370 ft)